REFERÊNCIAS BIBLIOGRÁFICAS




ADELSBERGER, H.H. et alii., "Rule based object-oriented simulation systems", Intelligent Simulation Systems, SCS, Simulation Series, 107-112, Jan, 1986.

ADELSBERGER, H.H. e NEUMANN, G., "Goal oriented simulation modeling using PROLOG", Proc. of the 1985 SCS Conf. on Modeling. and Simulation On MicroComputers, San Diego, Cal, 42-47, 1985

AMADOR, R.M.S.T. e PIMENTÃO, J.P.B., "Representação de conhecimento através de "frames", Univ. Nova Lisboa, Dep. Informática, Portugal, 1988

ARBEL, A. e SEIDMANN, A. " Performance Evaluation of FMS ". IEEE Transactions on Systems, Man and Cybernetics, July-August, 1984, pp. 606-617.

AZZONE, G. e BERTELÈ, U., "Measuring the economic effectiveness of flexible automation: a new approach", International Journal of Production Research., v. 27, 5, 735-746, 1989.

BANKS. J. e ARSON, J.S. Discrete-Event System Simulation. Prendice-Hall, Englewood Cliffs, NJ, 1984.

BARAD, M. e SIPPER, D., "Flexibility in manufacturing systems definitions and Petri net modeling", International Journal of Production Research, 26, 237-248, 1988.

BENJAAFAR, S., "Intelligent Simulation for Flexible Manufacturing Systems.. an Integrated Approach., Computers and Industrial Engineering, V.22, Nº 3, 297-311, 1992.

BEVANS, J.P., "First chose an FMS simulator", American Machinist, 126, May, 143145, 1982.

BOZER, Y.A., "Guided Vehicle Systems: Information/Control system implications of alternative design and operation strategies", In: Advanced Information Technologies for Industrial Material Flow Systems, Ed. S.Y. Nof and C.L. Moodie, 1989.

BRILL, P.H. e N1ANDELBAUM. M.,"On measures of flexibility in manufacturing
systems", International Journal of Production Research, 27, 747-756, 1989

BROWNE, J. et alii., "The development of a FMS design procedure", in Proceedings of the First ORSA/TIMS Special Interest Conference on FMS, K. Steeke & R. Suri (ed.), Ann Harbor, Michigan, 1984.

BUZACOTT, J.A., "The fundamental principles of flexibility 'm manufacturing systems Proc. of the First Int. Conf., Brighton UK, Elsevier, Amsterdam, 1982

BUZACOTT, J.A. e MANDELBAUN, M., "Flexibility and Productivity in manufacturing systems", in Proc. of the IIE Conf., Chiago, IL., Ind. Eng. Man. Press, 404-413, 1985

BUZACOTT, J.A. e SHANTICUMAR, J.A.,"Models for understanding FMS, AIIE Transactions, 12, 339-349, 1986.

BUZACOTT, J.A. e YAO, D.D., "FMS a review of analitical Models", Management Science, 32, 890-904, 1986.

CARLIER, J. , "Simulation as planning tool for an FMS", in Proc. of 4th International Conference of Simulation -m Manufacturing, 231-238, 1988.

CARRIE, A., "The role of simulation in FMS", 'M: A. Kuslak (ed.), Flexible Manufacturing Systems: Methods and Studies. Norht-Holland, Amsterdam, 191208, 1986.

CARRIE, A., Simulation of Manufacturing Systems. John Wiley & Sons Ltd.. 1988, London.

CARRIE, A.S. e PETSOPOULOS, A.C.,"Operation Sequencing in a FMS", Robotica, 3, 259-264, 1985.

CHATTERJEE, A. et alii., "Manufacturing Flexibility: Models and measurements". in Proc. of the First ORSA/TIMS Special Interest Conf. 'M FMS, K.E. STECKE e R. SURI (ed.),Ann Arbor, Mich., Elsevier, Ams., 1984.

CHANDRA, J. e SCHALL, S.O. "Economic Justification of FMS's using the Leontief input-output model". The Engineering Economist. Vol.34, N: 01, 1988.

CHEN, C.S. e SARIN, S.C., "A mathematical model for manufacturing system selection, in: A.Kuslak (ed.), Flexible Manufacturing Systems: Methods and Studies. Norht-Holland, Amsterdam, 03-25, 1986.

CHENG, T.C.E., "Simulation of Flexible Manufacturing Systems". Simulation, 45. Dec.. 299-302, 1985.

CHORAFAS, D. N., Knowledge Engineering., Van Nostrand Reinhold Edition, New York, 1990.

CHRISTY, D.P. e WATSON, H.J., "The application of simulation: A survey of a mdustry practice", Interfaces, 13, Oct, 47-55, 1983.

COSTA, R.S. e JARDIM, E.G.M. " Simulação no Gerenciamento da Produção. "Informativo do INT, pg. 13-24, v. 17, 34, jul/dez. 1985.

CO, H.C., JAW, T.J., Sequencing in manufacturing systems and other short queue length systems, Journal of Manufacturing Systems, 7, 1-9, 1988

CUNHA, C.J.C.A. " Produção e estratégia ". Anais do IX ENEGEP. Porto Alegre, Set, 1989.

CUNHA, C.J.C.A. "Aspectos estratégicos do CIM". Anais o IX ENEGEP. Porto Alegre, Set. 1989.

CZIULIK, C. e ROSA, E. "O CIM como elemento do planejamento estratégico das organizações". Anais do VIII ENEGEP. São Paulo, 1988.

DUBOIS, D. e STECKE, K. E., "Using Petri nets to represent production processes, Proc. 22nd IEEE Conference 'M control, 1983.

EGBELU, P.J., e TANCHOCO, J.M.A.. "Characterization of the automatic guided vehicle dispaching rules, International Journal of Production Research, 22, 359374, 1984.

EGBELU, P. J., "Establishment of economic-c production rate, production batch size and production sequence m manufacturing systems with flexible routing". European Journal of Operational Research, 67, 358-372, 1993.

ELMARAGHY, H.A. e HO, N.C., "A flexible system for computer control of manufacturing", Computer in Mechanical Engineering., 1, 53-63, 1982

ERKES, K. e SCHMIDT, H. "Flexible Fertigung". VDI- Zeitschrift, pg. 577-591, 1987.

FIKES, R. e KEHLER,T.,"The role of frame-based representation in reasoning", Commun. of the ACM, v 28, 9, 904-920, 1985.

FISCHLER, M.A. e FIRSCHEIN, 0., Intelligence - The Eye, the Bram, and the Computer, Addison-Wesley, 1987.

FREITAS, P.J., "Uso de sistemas inteligentes de simulação no gerenciamento de sistemas flexíveis de manufatura", Anais do X ENEGEP, Belo Horizonte, 1990.

FUTO, M.S. e SZEREDI, J., "A discrete simulation system based on artificial intelligence methods", In Discrete Simulation and Related Fields, A.JAVOR (ed), North-Holland, 135-150 1982

GAINES, BR. e SHAW, M.L.G.,"Expert systems and Simulation", 'M Proc. of the Conf. on Artif. Intell., Graphics and Simulation, G. BIRTWISTLE (ed.), San Diego, Cal., 95-101, 1985.

GARRET, S.E., "Strategy first: a case in FMS Justification", 'M Proc.of the second ORSA/TIMS Conf. on FMS, Ann Arbor, Mich., K.E. STECKE e R.SURI (ed.), Elsevier, Amsterdam, 17-30, 1986.

GERWIN, D. "Do's and don'ts of computerized manufacturing". Harvard Business Review, pg. 107-116, 1982

GERWIN, D. e TARONDEAU, J.C., "Intemacional comparisions of manufacturing flexibility", In Mananging International Manufacturing, K.FERDOWS (ed), Elsvier, Amsterdam, 169-185, 1989.

GOLDHAR, J. e JELINEK, M. " Plan for Economies of Scope ". Harvard Business Review, 61(6), 1983, pp. 141-148.

GREENWOOD, N. R. Implementing Flexible Manufacturing Systems. 1988. John Wiley & Sons, Inc., New York.

GROOVER, M.P. Automation, Production Systems and Computer Aided Manufacturing. Prendice-Hall, Inc. Englewood Cliffs, New Jersey, 1980.

GUPTA, Y.P. e GOYAL, S. " Flexibility of Manufacturing Systems: Concepts and Measurements ". European Journal of Operational Research, 43, pp. 119-135, 1989.

GUPTA, Y.P. e GOYAL, S. " Flexibility trade-offs in a randon FMS: A simulation study. International Journal of Production Research. V-30, N' 3, March, 527-557, 1992.

HARMON, P. e KING, D., Sistemas Especialistas, Ed. Campus, 1988

HAYES, R.H. e JAYCUMAR, R. " Manufacturing's Crisis: New tecnologies, Obsolete Organizations", Harvard Business Review, 66(5), 77-85, 1988.

RAYES-ROTH, F. et alli Bulding Expert Systems. Addison-Wesley Publishing Co.

HAYES, R. H. e WHEELWRIGHT, S. C. " Dinâmica dos Ciclos de Vida Processo-Produto ".Biblioteca Harvard de Administração de Empresas. n. 4, vol. 8. Ed. Abril.

HAYES, R.H. e WHEELWRIGHT, S.C. Restoring our Competitive Edge. New York, J. Wiley, 1984.

HENRIKSEN, J.O., "The integrated simulation enviroment (Simulation software of the 1990s)", Operations Research, 3 1, Nov-Dec, 1053-1073, 1983.

HILL, T., Manufacturing Strategy - The Strategic Management of the Manufacturing Function, Macmillan Education LTD, London, 1985.

HO, Y. C., "A survey of the discrete event dynamic systems", Annals of Operations Research, 3, 1985.

HURRION, R. D., "Intelligent Visual Interactive Modelling", European Journal of Operational Research, 54, 349-356, 1991.

INTELLICORP, KAPPA-PC 2.0 User's Manual, Melo Park, Cal, 1992.

INTELLICORP, KEE, User's Manual, Melo Park, Cal, 1985.

JAIKUMAR R., "Flexible Manufacturing Systems : A managerial perspective". Wp #I784-078, Harvard Business School, Boston, Mass., Jan, 1984

KAPLAN, R. S. " Must CIM be Justified by Faith Alone? ". Harvard Business Review, 64(2), 1986, pp. 87-95.

KIRAN, A. S. et alli, "An integrated simulation approach to design of flexible manufacturing systems", Simulation, Feb., 47-52, 1989.

KLAHR, P., et alii., "Rule oriented Simulation", Proc. of the 1980 International Conference on Cibernetics and Society, IEEE, Cambridge, Mass., Oct., 350-354, 1980.

KUSIAK, A., "Flexible Manufacturing Systems: A structural approach", International Journal of Production Research, 23, 1057-1073, 1985.

KUSIAK, A. e CHEN, M., "Expert systems for planning and scheduling manufacturing systems", European Journal of Operational Research, 34, 113-130, 1988.

LAW, A.M. e KELTON, W.D. Simulation Modeling and Analysis. McGraw-Hill, NY, 1991.

LAW, A.M. " Introduction to Simulation: A Powerful Tool for Analyzing Complex Manufactoring Systens". Industrial Engineering, pg 46-62, Maio 1986.

LEUNG, L. C., MAHESHWARI, S. K. e MILLER, W. A., "Concurrent part routing and tool allocation 'M FMS FMS with material handling considerations", Working Paper, Department of Industrial and Management Systems Engineering, U.S.F., Tampa, USA, 1990.

LEUNG, L. C. e TANCHOCO, J. M. A. , "Multiple machine replacement within an integrated firamework, The Engineering Economist, 32, 89 - 114, 1987.

MAHESHWARI, S. K. , "Planning and Operational control of FMS with material handling considerations", Ph.D. Dissertation, Department of Industrial and Management Systems Engineering, U.S.F., Tampa, USA, 1992.

MARTIN, D.L. e MUSSELMAN, K.J., "Simulation in the life clcle of FMS", in Proceedings of the First ORSA/TIMS Special Conference on FMS, K.E. STECKE & R. SURI (ed.), Ann Arbor, Mich., 154-167, 1984.

MEDEIROS, D.J. e SADOWSKI, R.P., "Simulation of robotic manufacturing cells:a modular approch", Simulation,40,03-12, 1983

MISHRA, P. K. et alli, "Simulation studies of flexible manufacturing systems", in Proceedgs of 4th International Conference of Simulation in Manufacturing, 119-128,1988.

MONTAZERI, M. e VAN WASSENHOVE, L.N., "Analysis of scheduling rules for FMS", Int. J. of Prod. Res., 28,785-802, 1990.

NOF, S. Y., BARASH, M., SOLBERG, J.J., "Operational control of item flow in versatile manufacturing systems", International Journal of Production Research, 17, 479-489, 1979.

NELSON,C.A. "A scoring model for FMS project selection". European Journal of Operational Research, N: 24, 1986.

O'KEEFE, R., "Simulation and Expert Systems - A taxonomy and some examples", Simulation, 46, Jan, 10-16, 1986

PENGDEN, C.D. et alii., Introduction to Simulation Using SIMAN, McGraw-Hill, New Jersey, 1990

PRIMROSE, P.L., e LEONARD, R.," Establish the viability of FMS", The FMS Magazine, 3, 114-116, 1985.

RACHAMADUGU, R.V. e STECKE, K.E., "Classification and Review of FMS Scheduling Procedures", Working Paper, Graduate School of Business Administration, The University of Michigam, Ann Arbor, 1989.

RADHARAMANAN, R. "Flexible Manufacturing Systems and Factories of the Future". Seminário de Automação Industrial, UFRGS, Set. 1989

RAMAN, N. et alii., "Real time scheduling of automated manufacturing center", European Journal of Operational Research, 40, 222-224, 1989

SABUNCUOGLU, 1. e HOMMERTZHEIM, D.L. "Computer usage in manufacturing systems". Computers and Industrial Engineering. Vol. 15, No 1-4, pg. 1-7 1988.

SABUNCUOGLU, 1. e HOMMERTZHEIM, D.L. " Experimental investigation of FMS machine and AGV scheduling rules against the mean flow-time criterion". European Journal of Operational Research, V-30, no 7, 1617-1635, 1992.

SCHRIBER, T.J. e STECKE, K.E., "Machine utilizations achieved using balanced FMS production ratios 'M a simulation setting, Annals of Productions Research, 32, 579-595, 1988.

SCHROER, B.J.e TSENG, F.T., "Modelling Complex manufacturing Systems UsingDiscret Event Simulation", Computers and Industrial Engineering., Vol 14, 4, pg 455-464, 1988.

SCOTT, A. C. et alii, A Practical Guide to Knowledge Acquisition.. Addison-Wesley Company, Inc. USA, 1991.

SETHI, A.K. e SETHI, S.P., "Flexibility in Manufacturing: a survey", The International Journal of FMS, 2, 289-328, 1990.

SHANNON, R.E., "Knowledge based simulation techniques for manufacturing", International Journal of Production Research, 3, 953-973, 1988.

SHANNON, R.E. et alli " Expert system and simulation". Simulation, pg.275-284, jun. 1985.

SKINNER,W. Manufacturing: The Formidable Competitive Weapon, New York, J. Wiley, 1985.

SOLBERG, J.J.,"Optimal design and control of computerized manufacturing systems", Proc. of AIIE Systems Eng. Conference, Boston, 137-147, 1976.

SOLBERG, J.J.,"CAN-Q User's guide", Purdue University, School of IE, 1980.

SON, Y.K. e PARK, C.S. "An economic avaluafion model for advanced manufacturing systems". The Engineering Economist. Vol. 34, 1, 1988.

STECKE, K.E., "Design, planning, scheduling and control problems of FMS", Annals of Operations. Research, 3, 51-60,-1985.

STECKE, K.E., "A hierarchical aproach to solving machining grouping and loading problems of FMS", European Journal of Operational Research., 24, 369-378, 1986.

STECKE, K.E. e SOLBERG, J.J., "Loading and control polices for FMS", International Journal of Production Research, 19, 481-490, 198 1.

SLACK, N., "The flexibility of Manufacturing systems", International Journal of Operational and Production Management, V.7, 4, 35-45, 1987

SURI, R., "An overview of evaluative models for Flexible Manufacturing Systems", Annals of Operations Research, 3, 61-69, 1985.

SURI, R. e DILLE, J. W., "A technique for on-line sensitivity analysis of flexible manufacturing systems", Annals of Operations Research, 3, 1985.

SURI, R. e HILDEBRANT, R. R. , "Modeling Flexible Manufacturing Systems using mean value analysis", Journal of Manufacturing Systems, 3, 27, 1984

SURI, R. e WYHITNEY, C., " Decision support requirements in flexible manufacturing", Journal of Manufacturing Systems, 3, 185-193, 1984.

SWAMIDASS, P.M. e NEWELL, W.T. "Manufacturing Strategy, Enviornmental Uncertanty and Performance: A Path Analytic Model ". Management Science 33(4), pp. 509-524, 1987.

TAGUCHI, G., "System of Experimental Design", Vol 1-2, Kraus International Publications, New York, USA, 1987

TALAVAGE, J. e HANNAM, R.G., Flexible Manufacturing Systems in Pratice,Aplications, Design and Simulation., Marcel Dekker Inc. New York, 1988.

TALAVAGE, J. e SHOLDHAN, R., "A combined AI-Simulation aproach for designing manufacturing systems", Proceedings. of 1987 SAE Int. Congress, Detroit, Feb, 1987.

VIALI, L., Simulação Aplicada a Manufatura Flexível, Tese de Mestrado não publicada, Universidade Federal SC-CTC-EPS, 1991.

VINAYAGAMOORTHY, R. e MITAL, A. "Economic feasibility of a robot installation". The Engineering Economist. Vol. 32, 3, 1987.

WAHAB, F.A.F.A., An expert system for the design os FMS's using simulation analyses. Tese de Doutorado. University of Alabama, 1986.

WANG, H. , "An experimental analysis of the flexible manufacturing system (FMS), in: A.Kuslak (ed.), Flexible Manufacturing Systems: Methods and Studies. Norht-Holland, Amsterdam, 319-339, 1986.

WALTERMAN, D.A., A Guide to Expert Systems. Addison-Wesley Publishing Co.. 1986

WHITNEY, A. e SURI, R., "Algorithm for parts and machines selection in FMS", Annals of Operations. Research, 3, 95-117, 1985.

WICK, C.., "Advances in Machining Centers", Manufacturing Engineering, Oct.,24-32, 1987.

WILHELM et alii., "Flexible Manufacturing Systems: A Review of Modeling Approches for Desing, Justification and Operation, M: A.Kusiak (ed.), Flexible Manufacturing Systems: Methods and Studies. North-Holland, Amsterdam, 0325, 1986.

WILHELM, W. E. e SHIN, H., "Effectiveness of alternate operations in a Flexible Manufacturing System, International Journal of Production Research, 23, 65-79, 1985.

WINSTON, P.H., Artificial Intelligence, Reading, Mass.: Addison Wesley, 1984.

WU, S.Y.D., WYSK, R.A., "An aplication of discret event simulation to on-1-me control and scheduling in flexible manufacturing", International Journal of Production Research, 27, 1603-1623, 1989.

YIM, D. S. e LINN, R. J., "Push and pull rules for dispatching AGV's in a FMS", International Journal of Production Research, 31, 43-57, 1993.

ZEESTRATEM, M.J., "The look ahead dispaching procedure", International Journal of Production Research, 28, 369-384, 1990.

ZELENOVIC, D.M., "Flexibility, a condition for effective production systems International Journal of Production Research., V 20, 3, 319-337, 1982

ZISK, B. I., " Flexibility is a Key to Automated Material Transport System for Manufacturing Cells", Industrial Engineering, Nov., 52-60, 1983.

ZHUANG, L. e HINDI, K. S. "Approximate decomposition for closed queueing network models of FMS with block-and-wait and state-dependent routing mechanism", European Journal of Operational Research, 67, 3, 373-387, 1993.